Marketing Demand Generation

Launch outbound email with a sending domain, a prospect list, a sequence and a review

How do you send cold email to new prospects and keep it out of spam?

Cold email is email to buyers who do not know you yet. The Deliverability Engineer agent sets up a separate domain to send it from. The List Builder agent builds a list of 500 to 1,000 contacts. The Sequence Writer agent drafts a sequence of four emails. After 30 days, you approve one change based on the reply results.

Published Updated

What you get
Outbound email program · Saltmarrow Studio
First change approved
4%
positive-reply rate from the first 100 contacts
640
contacts on the approved prospect list
Separate sending domain Passes every check for inbox delivery
Prospect list 640 contacts, each with a personal detail
Four-email sequence Sent to the first 100 contacts
Change from the 30-day review New subject line for email two

The positive-reply rate is the share of contacts who reply with interest.

See it run

An outbound email program for Saltmarrow Studio, in progress

Customers
34 consumer product brands · You look for more brands like them
Sequence emails sent 3 / 4
Schedule
Every 30 days
A sequence review with one change from the data
Run log
  1. You
    “Start cold email to consumer product brands, without putting the studio domain at risk.”
    Your instruction
  2. Sending domain ready Deliverability Engineer
    You chose a look-alike domain, which is separate from your main domain but looks like it. The Deliverability Engineer agent set up the new domain in your outbound email tool. The Deliverability Engineer set its SPF (Sender Policy Framework), DKIM (DomainKeys Identified Mail) and DMARC (Domain-based Message Authentication, Reporting and Conformance) records. Email providers use the three records to check that your emails come from you. During a three-week warm-up, the Deliverability Engineer raised the daily send volume slowly. The Deliverability Engineer tested inbox delivery at the main email providers. All checks passed.
  3. 640 contacts approved List Builder
    Your ideal customer profile (ICP) is a description of the companies that fit your offer best. The List Builder agent found 640 contacts at consumer product brands that match your ICP. The List Builder added a personal detail for each contact, such as a recent role change. The List Builder removed the contacts that are already active in your CRM. You approved the list.
  4. 3 of 4 emails sent to the first 100 contacts Sequence Writer
    The Sequence Writer agent drafted four emails from your core messages. The Sequence Writer wrote the opening line of each email from the contact's personal detail. The Sequence Writer started the sequence on 5 October, with open and reply tracking on. You chose positive replies as the main result, with meetings tracked next to them. You chose to tag the replies to this program in HubSpot, apart from the replies to your salespeople's own emails. The Sequence Writer sends the fourth email on 20 October.
    •
  5. You
    Your approval of the change after 30 days You
    On 4 November, the Sequence Writer agent reads the reply results for each email. You chose to fix subject lines first if too few people open the emails. The Sequence Writer recommends one change. Then you approve the change.
  6. Lead generation plan used Upstream
    Your lead generation plan comes from Plan Lead Generation.
  7. Core messages used Upstream
    Your core messages come from Define Core Messages.
  8. Ideal customer profile used Upstream
    Your ideal customer profile comes from Define Ideal Customer Profile.
How it works

You decide how personal each email is

You choose the one personal detail that the List Builder agent collects for each contact. For example, the detail can be a recent role change or a funding round. The Sequence Writer agent uses the detail in the opening line of each email. You also decide who each opening line is for. You get the strongest first result with a line for each contact. You can scale faster with a line for each segment, a group of similar contacts.

What it needs
Your ICP and buyer personas, for targeting the list
A separate sending domain, bought and set up
A LinkedIn Sales Navigator or Apollo account for building the list
A sending tool for outbound email sequences
What you get

A live outbound email program on a separate sending domain that passes deliverability checks, with a list of 500 to 1,000 contacts. A four-email sequence sent to the first 100 contacts, a starting reply rate, and one change made from the data.

Run sequence

Start to finish

You start from your lead generation plan, your core messages and your ideal customer profile. Then you, the Deliverability Engineer agent, the List Builder agent and the Sequence Writer agent build your outbound email program in four parts.

  1. 1
    Sending Domain Setup

    Prepare a separate sending domain

    Deliverability Engineer sets SPF, DKIM and DMARC records
    Deliverability Engineer raises the daily send volume slowly
    Deliverability Engineer tests inbox delivery before launch
    Deliverability Engineer
  2. 2
    Prospect List

    Build your list of prospects

    List Builder finds contacts that match your ICP
    List Builder adds a personal detail for each contact
    You approve the list
    List Builder + You
  3. 3
    First Email Sequence

    Send your first four emails

    Sequence Writer drafts the emails from your core messages
    Sequence Writer emails the first 100 contacts
    You choose what counts as a success
    Sequence Writer + You
  4. 4
    30-Day Sequence Review

    Change one part after 30 days

    Sequence Writer reads the reply results for each email
    Sequence Writer recommends the change that helps most
    You apply the change you approve
    Sequence Writer + You
Before it starts

What Works asks you

A few questions in plain words. The answers set up the run for your business.

Should you send from a look-alike of your main domain, which buyers trust more, or from a clearly separate domain that protects it better?
YouA look-alike domain, trusted but separate
How fast should the warm-up raise the volume: the safe three weeks, or faster if you need volume sooner?
YouThe full three weeks, the safe default
Which one personal detail should be collected for each contact, for the opening line to mention?
YouA recent role change or a new hire's goals
Should contacts marked active in your CRM be left off the list, or is some overlap fine?
YouLeave off all active CRM contacts to avoid contacting them twice
What counts as a success for the starting rate: any reply, a positive reply, or a booked meeting?
YouPositive replies, with meetings tracked next to them
If both the subject lines and one weak email do poorly, which do you want fixed first?
YouSubject lines first, if too few people open
Who runs it

The agents behind this workflow

The Deliverability Engineer agent sets up your sending domain. The List Builder agent builds your prospect list, and the Sequence Writer agent writes and reviews the emails.

Playbook specialist

Lead Capture and Nurture Specialist

Owns this area

Creates lead magnets and sets up lead scoring, so you capture the right leads and follow up with the best ones first.

On this workflow

Deliverability Engineer

Sets up and tests the sending domain so outbound email reaches the inbox, not spam

What it can do
Set up a separate sending domainSet SPF, DKIM, and DMARC recordsRun a gradual mailbox warm-upCheck authentication and inbox deliveryFind and fix deliverability problems before launch

List Builder

Builds the prospect list to match the ICP and adds the personal detail each email needs

What it can do
Search the list-building tool for contacts that match the ICPAdd job titles and company details to contactsFind a personal detail for each contactRemove duplicates of CRM contactsRemove invalid or risky addresses

Sequence Writer

Drafts the four-email sequence from the core messages and reviews the day-30 results for the first change

What it can do
Draft a four-email outbound sequence from the core messagesWrite subject lines made to get opens, not clicksPersonalize the opening line from list dataRead the reply results for each emailRecommend the one change that helps most
Jeanie, your right hand Works Crew

Jeanie leads a core crew of seven that runs your company day to day. They direct the specialist and workflow agents in each playbook, including the ones on this workflow.

Connect your tools

Bring what you already run

Works connects to the apps you already use.

  • Apollo The List Builder agent connects to Apollo.
  • HubSpot This workflow uses HubSpot.
  • Instantly The Deliverability Engineer agent connects to Instantly.
  • lemlist This workflow uses lemlist.
Other apps you can use
Your outbound email tool

or any outbound email tool you use

Your CRM

or any CRM you use

These are starting points, not a limit. Connect the tools you already use.

Connect your work

The workflows before your outbound email program

Linked cards are live pages. The others are part of the Marketing playbook in Works.

Works · AI business OS

One workflow inside your whole business

In Marketing, Launch Outbound Email is part of the Demand Generation work.

Prebuilt playbooks, plus your own
StrategyMarketingSalesCustomer SuccessPartnershipsProducts & ServicesOperationsFinancePeopleLegal & Compliance + Build your own
The Marketing playbook
74
Workflows
20
Specialist agents
147
Workflow agents
226
Templates
You're here
Launch Outbound Email
One of 74 Marketing workflows · run by 3 workflow agents
Templates

What comes with it

Built for this workflow
Cold Email Sequence DOCX
A document where you write a series of emails to people you have not contacted before. It opens in Works after you sign up.
Email Deliverability Checklist XLSX
A checklist of what you check before your emails go out. It opens in Works after you sign up.
Outbound Performance Tracker XLSX
A sheet where you track your outbound results. It opens in Works after you sign up.
Prospect List Inventory XLSX
A sheet where you list your prospects. It opens in Works after you sign up.
Also included here
Proof Point Library XLSX
A sheet where you list your proof points. It opens in Works after you sign up.
Channel Message Matrix XLSX
A sheet with your message for each channel. It opens in Works after you sign up.
Channel Media Plan XLSX
A plan with the budget and the lead target for each channel. It opens in Works after you sign up.
Campaign Brief DOCX
A document where you describe a campaign. It opens in Works after you sign up.
Webinar Follow-Up Sequence DOCX
A script for the follow-up emails after a webinar. It opens in Works after you sign up.
Lead Nurture Email Sequence DOCX
A document where you write a series of emails to leads. It opens in Works after you sign up.
ABM Target Account List XLSX
A sheet where you list the target companies for account-based marketing (ABM). It opens in Works after you sign up.

Each template opens inside Works after you sign up.

Questions

What people ask

Why send cold email from a separate domain?

The Sequence Writer agent sends cold email from a separate domain, which protects your main domain. You choose the kind of domain. The Deliverability Engineer agent sets up that domain. Buyers trust a look-alike of your main domain more. A fully separate domain gives the most protection. Two look-alike domains split the volume.

How does the warm-up work, and how long does it take?

A warm-up is a period when the Deliverability Engineer agent sends a few emails each day from a new mailbox. The Deliverability Engineer raises the daily volume slowly. You choose the speed. Three weeks is the safe default. Two weeks is faster, with more risk. Go slower if you will later send many emails each day.

What happens when a check for inbox delivery fails?

You decide what happens when a check fails. You can pause and fix the problem before any emails go out. You can go ahead on the mailboxes that passed and hold the rest. You can also stop the whole launch if the main mailbox fails.

How do you use AI to launch outbound email?

The Deliverability Engineer, the List Builder and the Sequence Writer are AI agents. The Deliverability Engineer sets up and tests your sending domain. The List Builder builds your prospect list. The Sequence Writer drafts the four emails. The Sequence Writer reads the reply results after 30 days. You approve the list and the change.

Send cold email that you keep out of spam

Sign up to launch your outbound email program.

Sign Up