Marketing Demand Generation

Act on intent data while your target accounts research a purchase

How do you reach your target accounts while they research a purchase?

Intent data shows which target accounts research a purchase. In Works, the Intent Evaluator agent recommends a provider of this data. The Signal Integrator agent flags the accounts with strong intent signals. It creates a CRM task for each flagged account within 24 hours. The Impact Analyst agent briefs your salespeople. It compares outreach to flagged accounts with standard outreach.

Published Updated

What you get
Intent data process · Saltmarrow Studio
Verdict confirmed
20 / 20
flagged accounts with a HubSpot task within 24 hours
3 / 3
salespeople briefed and checked
Provider Data on the content that accounts read online, pilot tier at $15,000 a year
Coverage 31 of 40 target accounts
Accounts flagged Only the accounts with the strongest signals
Task owner The existing account owner in HubSpot
Flagged accounts you contacted 7 of 20 asked for a proposal, 35%
Accounts not flagged, contacted as usual 3 of 20 asked for a proposal, 15%
Verdict Flagged accounts convert to a proposal request at a higher rate

You use the verdict to decide whether to renew the provider next year.

See it run

An intent data process in its first weeks

Target accounts
40 · Consumer product brands on your account-based marketing list
Salespeople briefed and checked 2 / 3
Schedule
Every 60 days
Comparison of flagged accounts and accounts not flagged
Run log
  1. You
    “Set up intent data for our 40 target accounts in HubSpot. Each flagged account needs a task within 24 hours.”
    Your instruction
  2. Provider approved Intent Evaluator
    You chose intent from the content that accounts read. You put coverage before price. The Intent Evaluator agent compared three providers. The Intent Evaluator agent checked how many of your 40 target accounts each provider covers. The recommended provider covers 31 of the 40 accounts. You started with a pilot tier at $15,000 a year.
  3. 9 tasks created in HubSpot Signal Integrator
    On October 5, the Signal Integrator agent connected the intent data feed to HubSpot. You chose to flag only the accounts with the strongest signals. You chose to give each flagged account to its existing account owner. By October 14, the Signal Integrator agent flagged 9 accounts. The Signal Integrator agent created a HubSpot task for each account within 24 hours. You checked the 9 tasks. Each task had the right owner and the signal detail.
  4. You
    Your readiness check needed You
    The Impact Analyst agent wrote the briefing for your three salespeople. They are the Founder, the Managing Director and the Account Manager. In each first message, your salespeople start with a relevant insight on the topic of the signal. In the readiness check, each salesperson turns a sample report into a first message. 2 of 3 salespeople passed the check. Check the first message of the Account Manager.
  5. Comparison in progress Impact Analyst
    You chose to compare flagged accounts with accounts not flagged in the same period. The Impact Analyst agent defined a conversion as a request for a proposal from a contacted account. The comparison runs for 60 days, until December 4. Then the Impact Analyst agent reports the conversion rate of each group.
    •
  6. Target account list used Upstream
    The list of 40 target accounts comes from Launch Account-Based Marketing.
  7. Ideal customer profile used Upstream
    The ideal customer profile comes from Define Ideal Customer Profile.
How it works

A CRM task for each flagged account within 24 hours

You decide which kind of intent matters most, for example the content your target accounts read. You decide if coverage or price comes first. The Intent Evaluator agent checks how many of your target accounts each provider covers. You choose how strong a signal must be to flag an account. The Signal Integrator agent assigns each flagged account to the owner you choose. You decide which salespeople the Impact Analyst agent briefs first.

What it needs
The target account list from Launch Account-Based Marketing
A CRM that can connect to an intent data feed
A budget for intent data, typically $15,000 to $80,000 a year, depending on the provider
Salespeople with time to act on intent signals within 24 hours
What you get

A live intent process with a selected provider and CRM tasks for high-intent accounts within 24 hours. All relevant salespeople are briefed. A 60-day comparison confirms that intent-triggered outreach converts at a higher rate.

Run sequence

Start to finish

You start from your target account list and your ideal customer profile. Then you and the Intent Evaluator, Signal Integrator and Impact Analyst agents set up your intent data process in four parts.

  1. 1
    Intent Data Provider

    Choose an intent data provider

    You choose which kind of intent matters most
    Intent Evaluator compares providers on coverage and CRM fit
    You approve the provider and its annual cost
    Intent Evaluator + You
  2. 2
    CRM Intent Integration

    Create CRM tasks for flagged accounts

    Signal Integrator connects the intent feed to your CRM
    You choose who gets each flagged account
    You check the first tasks for owner and context
    Signal Integrator + You
  3. 3
    Sales Team Briefing

    Brief your salespeople on signals

    Impact Analyst writes the briefing
    You choose how salespeople open each outreach
    You confirm each salesperson can read a signal
    Impact Analyst + You
  4. 4
    Outreach Impact Comparison

    Compare outreach with and without signals

    Impact Analyst compares conversion rates over 60 days
    You choose a fair comparison group
    You confirm the verdict on renewing the provider
    Impact Analyst + You
Before it starts

What Works asks you

A few questions in plain words. The answers set up the run for your business.

Which kind of intent matters most in your category: software review signals, broad content reading, or intent combined with account-based marketing (ABM)?
YouContent-reading intent, for B2B services
Is the recommended provider's coverage of your accounts worth its quoted annual cost?
YouStart with a pilot tier before the full contract
Should the intent threshold be tight, for only the strongest signals, or looser, to catch more accounts that are researching?
YouTight, strongest signals only at launch
Should a flagged account go to its existing account owner, to a shared queue, or to a salesperson by territory?
YouExisting owner first, then territory
How do you want your salespeople to open outreach to an intent-flagged account: with a relevant insight, a useful resource, or a question about a problem?
YouA relevant insight on the topic of the signal
Which group is a fair comparison: the same salespeople before intent data, accounts not flagged in the same period, or both?
YouAccounts not flagged in the same period
Who runs it

The agents behind this workflow

The Intent Evaluator agent recommends an intent data provider. The Signal Integrator agent creates the CRM tasks. The Impact Analyst agent briefs your salespeople.

Playbook specialist

Account-Based and Marketing Operations Lead

Owns this area

Runs account-based marketing, acts on intent data, and designs your marketing tools and data standards.

On this workflow

Intent Evaluator

Compares intent data providers on category coverage and CRM fit, and recommends one

What it can do
Compare providers on category coverageAssess signal quality and freshnessCheck CRM integration fitMap coverage against the target account listRecommend with the trade-offs named

Signal Integrator

Connects the intent data feed to the CRM, so high-intent accounts are flagged and create tasks automatically

What it can do
Connect the intent data feed to the CRMSet a workable intent thresholdRoute flagged accounts to the right ownerCreate timely outreach tasksFilter out weak and duplicate signals

Impact Analyst

Writes the briefing for salespeople and compares intent-triggered with standard outreach

What it can do
Write a practical briefing on intent dataWrite outreach that does not make buyers feel watchedCompare conversion for intent-triggered and standard outreachIsolate which signal types convert bestRecommend changes to the threshold and the approach
Jeanie, your right hand Works Crew

Jeanie leads a core crew of seven that runs your company day to day. They direct the specialist and workflow agents in each playbook, including the ones on this workflow.

Connect your tools

Bring what you already run

Works connects to the apps you already use.

  • HubSpot The Intent Evaluator, Signal Integrator and Impact Analyst agents connect to HubSpot.
  • Outreach This workflow uses Outreach.
Other apps you can use
Your outbound email tool
  • Apollo
  • Instantly
  • Lemlist
  • Smartlead

or any outbound email tool you use

Your CRM

or any CRM you use

These are starting points, not a limit. Connect the tools you already use.

Connect your work

The workflows before and after your intent data process

Linked cards are live pages. The others are part of the Marketing playbook in Works.

Works · AI business OS

One workflow inside your whole business

In Marketing, Act on Intent Data is part of the Demand Generation work.

Prebuilt playbooks, plus your own
StrategyMarketingSalesCustomer SuccessPartnershipsProducts & ServicesOperationsFinancePeopleLegal & Compliance + Build your own
The Marketing playbook
74
Workflows
20
Specialist agents
147
Workflow agents
226
Templates
You're here
Act on Intent Data
One of 74 Marketing workflows · run by 3 workflow agents
Templates

What comes with it

Built for this workflow
Intent-to-Action Map DOCX
A document where you match each intent signal to an action. It opens in Works after you sign up.
Intent Provider Selection Matrix XLSX
A grid where you compare intent data providers. It opens in Works after you sign up.
Intent Signal Play Matrix XLSX
A grid of the outreach you use for each kind of intent signal. It opens in Works after you sign up.
Also included here
Intel Routing Matrix XLSX
A grid of who receives each kind of market intelligence. It opens in Works after you sign up.
Retargeting Audience Matrix XLSX
A grid of the audiences you show ads to again. It opens in Works after you sign up.
Lead Scoring Model XLSX
A sheet where you score each lead. It opens in Works after you sign up.
Scoring Criteria Matrix XLSX
A grid of the criteria you use to score leads. It opens in Works after you sign up.
Intel Source Inventory XLSX
A sheet where you list your sources of market intelligence. It opens in Works after you sign up.
ABM Engagement Tracker XLSX
A sheet where you track how each target account responds to your account-based marketing. It opens in Works after you sign up.
ABM Play Matrix XLSX
A grid of the actions you plan for each target account. It opens in Works after you sign up.
ABM Target Account List XLSX
A list of the target accounts for your account-based marketing. It opens in Works after you sign up.
ABM Account Plan Canvas DOCX
A document where you plan your work for each target account. It opens in Works after you sign up.
Expansion Signal Matrix XLSX
A grid of the signals that show a customer may buy more. It opens in Works after you sign up.

Each template opens inside Works after you sign up.

Questions

What people ask

What is intent data, and what does it cost?

Intent data is outside data that shows which accounts research a purchase. One kind comes from software review sites. Another shows the topics accounts read online. You can also use intent data with account-based marketing (ABM), which targets a chosen list of accounts. You choose the kind to use. Intent data typically costs $15,000 to $80,000 a year.

How does a flagged account become a task for a salesperson?

The Signal Integrator agent connects the intent data feed to your CRM. You choose a tight threshold, for only the strongest signals. Or you choose a looser one, to catch more accounts that are researching. You choose who gets each flagged account. The Signal Integrator agent creates each task within the time you set, for example 24 hours.

What do your salespeople learn in the briefing?

The Impact Analyst agent writes a briefing on intent data. Your salespeople learn what intent data is. They learn how to read a signal. They also learn how to open outreach without naming the signal. You choose the opening, for example a relevant insight on the topic of the signal. You confirm that each salesperson can read a signal.

How do you know if intent data is worth its cost?

The Impact Analyst agent compares outreach to flagged accounts with standard outreach over 60 days. The Impact Analyst agent compares the conversion rate of each group. You choose a fair comparison group, for example accounts not flagged in the same period. You decide what increase in conversion justifies renewing the intent data spend next year. You then confirm the verdict.

How do you use AI to act on intent data?

In Works, the Intent Evaluator agent compares intent data providers. The Intent Evaluator agent recommends one provider. You approve the provider. The Signal Integrator agent creates outreach tasks for flagged accounts. The Impact Analyst agent writes the briefing for your salespeople. The Impact Analyst agent compares outreach to flagged accounts with standard outreach. You confirm the verdict.

Reach target accounts while they research a purchase

Sign up to choose your intent data provider.

Sign Up